Specifications

SATEL INT-KSG 11
The outputs must be the 24. MONO S WITCH , 25. BI S WITCH , 105. S HUTTER UP ,
106. S HUTTER DOWN or R EMOTE SWITCH type (they need not be assigned to any group
of outputs).
The keypad can be used to control the KNX system, if the INT-KNX module is
connected to the control panel.
Fig. 8. "Definitions" tab, D LOAD X program.
Creating a group of macro commands
1.
Click the "Groups" tab.
2. Click the group to be edited.
3. Enter the group name.
4. Click the "Add macro" button. Select the macro command to be added from the drop-
down menu.
5. Click the "Write" button. The data will be written to the keypad.
Creating a macro command
1. Click the "Definitions" tab.
2. Click the "New macro" button. A new macro command will appear in the list.
3. Enter a name for the new macro command.
4. If the macro command is to be run without entering the code by the user, enter the code
with a suitable authority level.