Specifications

10 INT-KSG SATEL
Fig. 7. "Groups" tab, D LOAD X program.
Autoexecute – if this option is enabled and there is just one macro command in the group,
touching the
key will not display the list of macro commands, but will run the macro
command at once (if the A
UTHORIZATION REQUIRED option is enabled, authorization by
means of a code will be necessary).
Command – the function that can be assigned to a macro command, executed by the control
panel. It can be:
 arming selected partitions in a defined mode;
 disarming selected partitions;
 clearing alarm in selected partitions;
 inhibiting selected zones;
 unbypassing selected zones;
 enabling selected outputs;
 disabling selected outputs;
 changing status of selected outputs;
 sending KNX telegram;
 sending key sequences.
The partitions must be controlled by user code.
The zones must not have the B YPASS DISABLED option enabled.