Specifications

8 INT-KSG SATEL
Quick control [Control (8#)] – if this option is enabled, the O UTS CONTROL user function
can be started by pressing in turn the 8 keys (without the need to enter the user
code).
Sound volume – the function makes it possible to control loudness level of the keypad
sounder. The function is unavailable in the D LOAD X program.
State inspections [Reviews] – you can select which of the functions started by holding the
number keys will be available in the keypad.
Fig. 5. "State inspections" tab, D
LOAD X program.
Permanently displayed partitions [State part.] – you can select the partitions whose state
will be permanently presented in the lower line of the display. Up to 16 partitions can be
selected. The partitions are displayed successively: for example, if the partitions 3, 6 and 7
are selected, their state will be displayed in the first, second and third position of the
display.
Zone state [Zone characters] – you can define the symbols which will illustrate the state of
zones.
Partition state [Part. characters] – you can define the symbols which will illustrate the state
of partitions.
Code+arrows – you can define which functions will be started on entering the code and
touching the selected arrow key.
Tamper signaled in partition [Tamper in part.] – selection of the partition in which alarm will
be signaled if the keypad tamper contact is opened or the keypad is disconnected from the
control panel.