Specifications

6 Installer Manual SATEL
INT-SCR. Multifunctional keypad. It can work as:
INT-S. Partition keypad.
INT-SCR. Partition keypad with reader. Functionality similar to that of the partition
keypad.
INT-ENT. Entry keypad. The main task of the entry keypad is activation the delay for 3
INTERIOR DELAYED type zones. After expiry of the time period preset on the keypad,
unless the system is disarmed, the interior delayed zones will again act as instant
ones.
INT-SZ / INT-SZK. Code lock. Enables performance of the access control functions.
INT-R. Universal expander for card / chip readers. Supports the proximity card readers
manufactured by SATEL, readers with WIEGAND 26 interface or DALLAS chip readers.
Enables performance of the access control functions.
CA-64 E Zone expander. Adds 8 programmable hardwired zones to the security system.
CA-64 EPS. Zone expander with power supply. Adds 8 programmable hardwired zones to
the security system. Equipped with a built-in switching power supply.
CA-64 ADR. Addressable zone expander. Adds 48 addressable zones to the security
system. Equipped with a built-in switching power supply. Control panels support the
addressable zone expanders with firmware version 1.5 (or later).
CA-64 O. Output expander. Adds 8 programmable outputs to the security system. Made in
three versions:
CA-64 O-OC – 8 OC type outputs;
CA-64 O-R – 8 relay outputs;
CA-64 O-ROC – 4 relay outputs / 4 OC type outputs.
INT-ORS. DIN-rail output expander. Adds 8 programmable relay outputs to the security
system. The relays can control electrical devices supplied with 230 V voltage.
CA-64 OPS. Output expander with power supply. Adds 8 programmable outputs to the
security system. Equipped with a built-in switching power supply. Made in three
versions:
CA-64 OPS-OC – 8 OC type outputs;
CA-64 OPS-R – 8 relay outputs;
CA-64 OPS-ROC – 4 relay outputs / 4 OC type outputs.
INT-IORS. DIN-rail zone/output expander. Adds 8 programmable hardwired zones and 8
programmable relay outputs to the security system. The relays can control electrical
devices supplied with 230 V voltage.
CA-64 PP. Zone/output expander with power supply. Adds 8 programmable hardwired
zones and 8 programmable outputs (4 relay and 4 OC type) to the security system.
Equipped with a built-in switching power supply.
ACU-100 / ACU-250. ABAX wireless system controller. Enables the alarm system to be
operated using the ABAX keyfobs and the ABAX bidirectional wireless devices to be
used in the alarm system.
INT-VG. Voice module. Allows remote operation of the control panel from the telephone
keypad (interactive voice menu). It can store 16 voice messages for telephone
messaging.
INT-VMG. Voice message generator. Plays back prerecorded messages when specified
events occur in the system.
INT-KNX. KNX integration module. Enables interfacing of the control panel with the KNX
system.