Specifications

2 Installer Manual SATEL
1. General
This manual applies to the INTEGRA 128-WRL control panel. The manual also describes
keypads compatible with the control panel and other devices that may be included in the
security alarm system.
The INTEGRA 128-WRL control panels meet the requirements of the following standards:
– EN 50131-1 Grade 2;
– EN 50131-3 Grade 2;
– EN 50131-6 Grade 2;
– EN 50130-4;
– EN 50130-5 Class II.
2. Features
System structure
• 32 partitions.
• 8 objects (subsystems).
Zones
• 8 programmable hardwired zones on the control panel mainboard:
– support for NO and NC type detectors, as well as roller shutter and vibration detectors;
– support for Single EOL and Double EOL configuration;
– programmable value of end-of-line resistors;
– several dozen zone types.
• Maximum number of programmable zones: 128.
Outputs
• 8 programmable hardwired outputs on the control panel mainboard:
– 2 high-current outputs;
– 6 low-current outputs, OC type;
– over 100 functions;
– execution of custom control functions due to the possibility of programming complex
logic operations on the outputs.
• Maximum number of programmable outputs: 128.
• 3 high-current outputs on the control panel mainboard with power supply output
functionality.
Communication buses
• Keypad bus for connecting up to 8 devices.
• Expander bus for connecting up to 32 devices.
Wireless devices
• Integrated wireless interface of the ABAX system to allow operation of:
– up to 48 wireless devices;
– up to 248 APT-100 keyfobs.
• Two-way encrypted radio communication in the 868 MHz frequency band