Specifications

SATEL INTEGRA 128-WRL 21
5.12 GSM telephone start-up
If the control panel is to send data in GPRS technology, it is recommended that a SIM
card with tariff plan for at least 10 MB of data transfer per month is used.
Having started the control panel, you can start up the GSM phone. A GSM antenna must be
connected to the control panel. Support for the GSM communicator must be enabled in the
control panel (SERVICE MODE STRUCTURE HARDWARE GSM USE GSM PHONE). In order
to start up the GSM telephone, do the following:
1. Program the SIM card PIN code. You can do so using:
– the keypad ([SERVICE CODE] SERVICE MODE STRUCTURE HARDWARE GSM PIN
CODE
);
– the DLOADX program („Structure” window „Hardware” tab „GSM phone” branch
„PIN” field).
2. Insert the SIM card into the onboard socket (see: Fig. 10). Telephone logging into the
GSM network may take a few minutes.
Fig. 10. Inserting the SIM card in its slot.
The user function GSM IMEI/V/SIG. ([CODE] TESTS GSM IMEI/V/SIG.) makes it possible
to check the level of signal received by the antenna, individual telephone identification
number and telephone version. If the signal level is equal to 0, GSM/GPRS communication is
impossible. The signal level may be equal to 0 in the following cases:
• antenna not connected or incorrectly connected;
• telephone does not start up properly (e.g. no SIM card, invalid PIN code, blocked SIM
card) – in such a case, the control panel should report trouble;
• GSM network out of range.