Specifications

SATEL GSM LT-1 3
2.1 INTEGRATION WITH INTEGRA CONTROL PANELS
Fig. 1. Module working in conjunction with the INTEGRA control panel.
When connected to the INTEGRA control panel, the module offers the following benefits:
 transmission of event codes to the monitoring station via GSM network;
 messaging via GSM network, including SMS messaging (for the INTEGRA Plus
control panels, an additional feature is available: messaging by means of SMS
messages, whose content corresponds to the description in event log and thus the
installer does need to define it);
 remote programming of the control panel from a computer with D LOAD X program
installed (with a fast data transfer due to GPRS);
 remote management of the alarm system from a computer with G UARD X program
installed (with a fast data transfer due to GPRS).
The module can control connection with the INTEGRA control panel.
If communication with the GSM module is to be effected through the RS-232 port, the
local programming function in the INTEGRA control panel must be disabled.
2.2 WORKING IN CONJUNCTION WITH STAM-1 / STAM-2 MONITORING STATION
Fig. 2. Module working in conjunction with the STAM-2 monitoring station.
When connected to the STAM-1 / STAM-2 monitoring station, the module makes it possible
to receive event codes sent in the form of SMS or CLIP message. If used in conjunction with
the STAM-2 monitoring station, the module also enables the monitoring station to receive
CSD data transmissions containing the event codes and to send SMS messages.