Specifications

34 GSM LT-1 SATEL
If the "Server from SMS" ("Firmware update" tab) option is enabled in the module, you can
send a message with the xxxxxx=yyyy:zz. or xxxxxx=yyyy:zz= content, where "xxxxxx" is
the control command used to start the update, "yyyy" is the address of server with the latest
firmware for the module (IP address or name), and "zz" is the server port number. The
module will connect to the computer whose address is given in the SMS message. If
the control command given in the SMS message is correct, and the other data are wrong, the
address and port of the server to which the module is to connect will be downloaded from
the settings programmed in the module.
After completion of the update, an SMS message containing information on the result of the
process and on the module firmware version will be sent to the telephone number from which
the SMS message initiating the firmware update was sent.
12. RESTORING THE FACTORY SETTINGS
12.1 DLOAD10 PROGRAM
1. Select the "Communication" command on the menu bar to open the menu.
2. Select the "Restore default settings" function in the menu. A window will be displayed in
which you are to confirm your intention to restore the module factory settings.
Fig. 18. "Restore default settings" function in the "Communication" menu.
12.2 DTMF PROGRAMMING
Call the function [13**], enter the digits 1234 and confirm using the # key. The factory settings
will be restored.
12.3 MODULE FACTORY SETTINGS (DLOAD10)
"GSM LT-1" tab:
Modem format: auto
Acces code: 123456
RS-232 baud rate: 19200 bps
Enabled options:
Full, international number