Specifications

30 GSM LT-1 SATEL
The module offers the following forms of event code sending to the monitoring station:
 GPRS – packet data transmission.
 CSD – data transmission.
 SMS – SMS messages. If the event code is sent using an SMS message, the module will
not receive the acknowledgement of receipt of the event code by the monitoring station.
Therefore, this reporting link should be used as the last one (see: "Priority" p. 24). In the
first place, you should use the reporting links which allow the module to receive the
acknowledgement of receipt of the event code by the monitoring station.
In order to start the reporting:
 Enable the "Reporting" option.
 Enable the event buffering, if the events are to be written to the event log and the module
is to acknowledge receipt of events from the control panel before forwarding them to the
monitoring station (see: "Events buffering" p. 23).
 If the events buffering option is enabled and the module is to provide information about
problems with transmission, enter the content of SMS message (see: "Send SMS" p 25)
and telephone number (see: "Tel. number” p. 25), to which the information will be sent.
 If the module is to send test transmissions to the monitoring station:
 enter the system identifier (see: p. 24);
 program the period of module test transmission (see: "Test transmission every" p. 21)
and define its remaining parameters (see: p. 25).
 If the module is to send events from the INTEGRA control panel, you can enable the
supervision of connection with INTEGRA (see: "INTEGRA presence supervision" p. 22).
7.1 STARTING THE GPRS REPORTING
 Program the system identifier (see: p. 24).
 Select GPRS as the reporting link (see "Priority" p. 24).
 Enter the GPRS communication parameters (see: p. 19):
 name of access point (APN) for the Internet GPRS connection;

DNS server IP address which is to be used by the module (you do not need to
program the DNS server address, if IP address will be entered for the monitoring
station);
 user name for the Internet GPRS connection;
 password for the Internet GPRS connection.
7.1.1 Module test transmissions (GPRS)
Configure the parameters of monitoring station(s) (see: p. 24):
 enter the monitoring station address;
 enter the number of TCP port on which communication with the monitoring station will
take place;
 enter the encryption key for data sent to the monitoring station;
 enter the GPRS key.
7.1.2 Reporting events from the INTEGRA control panel (GPRS)
Parameters related to the monitoring stations will be automatically downloaded from the
control panel.