Specifications

16 GSM LT-1 SATEL
Explanations for Fig. 9:
1 - GSM module type.
2 - module firmware version (version number and build date).
3 - information on the status of communication between module and program.
4 - time and date according to the module clock. When logging into the network, the
module updates these data automatically, if the operator whose services are used by
the module offers such a function.
5 - information on the GSM telephone status.
6 - level of signal received by the GSM antenna.
Buttons:
Events – button opens the "Events buffer" tab.
Read – button allows reading data from the module.
Write – button allows writing data to the module.
Quit transmission – button makes it possible to cancel the data reading/writing.
Event log read – button allows reading the event log.
Configuration – button opens the "Configuration" window.
Exit – button closes the program.
5.2.4 Status bar
Fig. 10. Status bar in D
LOAD 10 program.
Explanations for Figure 10:
1 - icon indicating the status of communication with the module:
– green color – ready to send data;
– alternating green and yellow color – data transmission in progress;
– gray color – COM port disabled.
A click on the icon button in case of communication via the RS-232 port – will
enable/disable the COM port.
2 - information on way of communication with the module:
– COMn (n = COM port number) – communication through the RS-232 port;
– TCP/IP – communication using the GPRS technology.
5.2.5 Changing the program access code
1. In the "File" menu, select "Configuration", and then "Change access code" (see: Fig. 11).