Specifications

14 GSM LT-1 SATEL
Fig. 7. "Configuration" window.
5.2.2 Remote programming
During remote programming, the module will not execute any other functions
requiring the use of GSM telephone.
Most of the parameters required for remote programming of the module can only be
programmed using the D LOAD 10 program.
The remote programming is available after the following items have been programmed:
 in the "GSM LT-1" tab:
 PIN code of the SIM card (if PIN code is required by the card);
 access point name (APN) for the Internet GPRS connection ("GPRS APN" field);
 DNS server IP address ("DNS server" field) to be used by the module (you do not
need to program the DNS server address, if the computer address will be entered as
an IP address, not a name);
 user name for the Internet GPRS connection ("Username" field);
 password for the Internet GPRS connection ("Password" field);
 in the "Downloading TCP/IP" tab:
 the control command that initiate connection with the computer ("Initiating SMS" field);
 address of the computer from which the module is to be remotely programmed
("Server address" field);
 whether the module can connect to the computer whose address will be given in the
SMS message ("Server from SMS" option);
 number of the port through which communication between computer and module is to
be effected;
 D LOAD 10 key.
The computer running the D LOAD 10 program must have the so-called public address (that
can be seen directly in the Internet by everybody).