Specifications

10 GSM LT-1 SATEL
2 – 5 h 57 min,
3 – 11 h 56 min,
4 – 23 h 55 min,
5 – 2 d 23 h 53 min,
6 – 6 d 23 h 30 min.
Having entered the parameter, you can either confirm it at once with the [#] key or enter
the next parameter to define whether the first test transmission is to be performed at a time
randomly selected by the module:
0 – no,
1 – yes.
[20
**
] – parameter defining whether the module test transmission is to have a priority (see:
"Messaging priority" p. 21):
0 – no,
1 – yes.
[21
**
] … [24
**
] – telephone number to which the module will be able to send CLIP test
transmissions ([21] – 1. phone number; [22] – 2. phone number; [23] – 3. phone number;
[24] – 4. phone number). You can enter from 1 to 16 characters (digits: 0-9 and characters:
#,
*
, +). It is recommended that the phone number be preceded by the country code.
[25
**
] – 6 digits (ddhhmm) defining the test transmission period. You can program up to
31 days 23 hrs 59 min. Values 00 mean no test transmission.
Having entered 6 digits, you can either confirm them at once using the [#] key or enter
a seventh digit to define whether the first test transmission is to be performed at a time
randomly selected by the module (see: "Test transmission every" p. 21):
0 – no,
1 – yes.
[26
**
] – telephone number to which the module will send confirmation of a change in module
settings, received in the SMS message (see: "Send SMS on change to" p. 20). You can
enter from 1 to 16 characters (digits: 0-9 and characters: #,
*
, +). The entered phone
number must be preceded by the country code.
[27
**
] – 6 digits representing the SMS control command to be sent to module to program the
test transmission period (see: "Change test period" p. 20).
[28
**
] … [31
**
] – in each function you have to program 6 digits representing the SMS control
command to be sent to the module to program the phone number for test transmissions
([28] – 1. phone number; [29] – 2. phone number; [30] – 3. phone number; [31] – 4. phone
number; see also: "Change tel. 1–4" p. 20).
[32
**
] … [35
**
] – number of test transmission retries ([32] – for 1. phone number; [33] – for 2.
phone num
ber; [34] – for 3. phone number; [35] – for 4. phone number). You can program
values from 1 to 15.
[36
**
] … [39
**
] – parameter defining whether the test transmission sent by the module ([36] –
to 1. phone number; [37] – to 2. phone number; [38] – to 3. phone number; [39] – to 4.
phone number; see also: p. 21 and "Send SMS on change to" p. 20) is to be confirmed:
0 – no,
1 – yes,
2 – yes, and if there is no confirmation an SM
S will be sent.
[40
**
] – parameter defining whether the content of SMS message to be sent if there is no test
transmission receipt confirmation is to be a default one:
0 – no (SMS message content will be as defined by means of the D LOAD 10 program),
1 – yes (SMS message will contain the "CLIP failed" information).