Cyclone Micro 2 Multimedia Player User manual Cyclone Micro 2 Cyclone Micro 2 Full HD 1080p HD interface Media Player Page 1. Version 0.
Cyclone Micro 2 Multimedia Player Contents: Safety Instructions:..................................................................................................... 4 Product Details:........................................................................................................... 6 Packaging List:........................................................................................................ 6 Front View:....................................................................................
Cyclone Micro 2 Multimedia Player Slideshow Viewing with Background Music:................................................ 26 File:..............................................................................................................................28 Settings:......................................................................................................................29 Firmware Upgrade:...................................................................................................
Cyclone Micro 2 Multimedia Player Safety Instructions: READ THESE INSTRUCTIONS: All safety and operating instructions should be read before this product is used. KEEP THESE INSTRUCTIONS: These safety and operating instructions should be retained for future reference. FOLLOW ALL INSTRUCTIONS: All operating instructions should be followed. AVOID USING PRODUCT NEAR WATER: Do not use this product near a water source. ALWAYS CLEAN WITH A DRY CLOTH: Clean using a soft, dry cloth only.
Cyclone Micro 2 Multimedia Player AVOID BLOCKING AIR VENTS: Do not block the air vents in order to avoid heat build up. A minimum of 5cm is recommended to maintain free air flow. PROTECT THE POWER CORD: Prevent the power cord from being walked on and being pulled with sudden force. Protect the cord from being pinched, particularly at plugs and the point where they exit the device. DO NOT DROP: Do not drop the player as this will cause irreversible damage.
Cyclone Micro 2 Multimedia Player Product Details: Packaging List: Please ensure that the following items are included in the box when opened. If any items are missing, please contact your supplier immediately. Media Player Power Adapter Remote Control AV Cable Support CD 1x 1x 1x 1x 1x Front View: 1 USB Host USB Host port to connect to multiple external storage devices. 2 LED Light LED light display. The LED will light up blue when switched on. It will light up red when switched to standby mode.
Cyclone Micro 2 Multimedia Player Back View: 1 AV Out 2 HD INTERFACE 3 DC IN 5V Composite video output. High definition video output port. Used to display high quality video and audio. Power port Page 7. Version 0.
Cyclone Micro 2 Multimedia Player Remote Control: １４ １ １５ ２ １６ ３ １７ ４ １８ ５ １９ ６ ２０ ７ ２１ ８ ２２ ９ ２３ １０ ２４ １１ ２５ １２ ２６ １３ ２７ 1.Standby:Switches the Cyclone Micro 2 on and off from standby mode. 2.Prev :Press to return to previous file. 3.Play/Pause:Press to pause media playback. Press again to resume media playback. 4.FR:Press to fast rewind. 5.Stop:Stops media playback. 6.UP:Navigation button. Moves cursor up. 7.Return:Returns user to the previous menu. Page 8. Version 0.
Pressing it again to play. Cyclone Micro 2 Multimedia Player 8.Enter:Pressing this button confirms or selects an action. 9.Left:Navigation button. Moves cursor left. 10.Down:Navigation button. Moves cursor down. 11.Repeat:Press the Repeat button will change the repeat mode. 12.Subtitle:Switch subtitle ON or OFF. 13.16:9/4:3:Press to adjust the display aspect ratio. 14.AV/HD Interface:Toggles the Cyclone Micro 2 between AV and HD Interface. 15.Mute:Switches on and off audio output. 16.
Cyclone Micro 2 Multimedia Player User Interface: The Cyclone Micro 2 user interface has been designed to allow easy access to the media player’s many features. Main Menu: Upon starting the Cyclone Micro 2 this menu will be displayed first. Movie: Provides access to movie media files. Music: Provides access to audio media files. Picture: Provides access image media files. File: Provides access to all available media files. Settings: Provides access to the Setup Menu. Page 10. Version 0.
Cyclone Micro 2 Multimedia Player Basic Setup: To setup up your media player you will need to connect it to your TV set and supply power to the Cyclone Micro 2. You may also wish to connect the Cyclone Micro 2 to an external hard drive or plug in a pen drive. First of all examine the back of your TV set and locate its AV ports. Please make sure you have the correct cables for your chosen setup.
Cyclone Micro 2 Multimedia Player HD Interface Cable: Connecting your Cyclone Micro 2 to your TV via provides the highest quality of visual output and high quality audio in a single cable. output can provide video resolutions of up to 1080p**. Connect the HD Interface cable* to the HD Interface output interface on the back of the Cyclone Micro 2. Connect the other end of the cable to your TV HD Interface input port. Switch on your TV and select HD Interface mode, if required.
Cyclone Micro 2 Multimedia Player Memory Card Interface: The Cyclone Micro 2 is also capable of reading memory cards* ** with its builtin card slot. The built-in card slot is capable of supporting SD and MMC cards. To view media stored in the memory card, switch the media player on. Insert the memory card gently into the card slot, and select the media type you wish to view. It may take a moment for the media player to detect the memory card.
Cyclone Micro 2 Multimedia Player Viewing Multimedia: The Cyclone Micro 2 is a full featured multimedia player, providing a wide range of functionality. By using its main menu you can easily play movies, music and image files that are stored on an external storage device. Movie Playback: Playing movies using the Cyclone Micro 2 is very simple and supports a wide variety of movie formats. These include, but are not limited to, MKV, FLV, AVI and WMV.
Cyclone Micro 2 Multimedia Player When the device type has been selected, use the navigation buttons on the remote control to select the partition for the media player to access. The default letter usually given to the primary partition is “f:” After you have selected the partition, use the navigation buttons on the remote control to navigate to the folder or partition file the movie is located in. When you have found the movie you wish to view, navigate to it.
Cyclone Micro 2 Multimedia Player Advanced Video Settings: To get to the advanced video settings press the OSD button on the remote control whilst playing a movie. This will bring up a window in the centre of the screen. From this screen are a number of available options. Track Select Select:: If the movie currently playing has more than one audio track, this option will allow you to select the one you wish to hear.
Cyclone Micro 2 Multimedia Player To adjust the display aspect ratio, use the left and right navigation buttons to select one of the following. Press ENTER on the remote control to confirm the selection. Video Full Screen This option, when selected, stretches the image to fill the whole screen, whilst maintaining the movies original resolution. Screen Full Screen This option, when selected, stretches the image to fill the whole screen.
Cyclone Micro 2 Multimedia Player Channel: This option allows you to select different audio output. To change audio output, use the left and right navigation buttons on the remote control. Press ENTER on the remote control to confirm the selection. Stereo: Left: Right: This option will select 2 channel stereo audio output during movie playback. Selecting this option will output audio from the left speaker only. Selecting this option will output audio from the right speaker only.
Cyclone Micro 2 Multimedia Player Audio Playback: Playing audio media using the Micro 2 is very simple. It supports a variety of audio formats including MP3, WMA, AAC and OGG. Using the Cyclone Micro 2 remote control, navigate to “Music” and press ENTER to select it. This will active the music filter and take you to the device list. Once in the device list, use the navigation buttons to select the device type the media is located in.
Cyclone Micro 2 Multimedia Player Audio Playback Options: During playback, there are a number of options to choose from. Pressing PLAY/PAUSE will pause the audio file. Pressing PLAY will resume audio playback. Pressing the FF button will speed up audio playback. Pressing it again to play. Pressing the FR button will rewind audio playback. Pressing it again to play. Pressing the MUTE button will switch off sound from audio playback. Pressing it again will switch on sound again.
Cyclone Micro 2 Multimedia Player Advanced Audio Settings: To get to the advanced audio settings press the OSD button on the remote control whilst playing music. This will bring up a window in the centre of the screen. From this screen are a number of available options. Loop Mode: Play mode allows you to select different audio playback modes such as randomise or play once. Random: Only Once: Rotate One: Rotate All: Sequence: Selecting this option will randomise the order audio files are played.
Cyclone Micro 2 Multimedia Player To select a sound setting, use the LEFT and RIGHT NAVIGATION buttons on the remote control. Press ENTER on the remote control to confirm the selection. Display Display:: This option allows you to select the visualisation during audio playback. To select a visualisation mode, use the left and right navigation buttons on the remote control. Press ENTER on the remote control to confirm the selection. Spectrum: Default. Displays the Spectrum visualisation.
Cyclone Micro 2 Multimedia Player Image Playback: Playing image files using the Cyclone Micro 2 is very simple and supports a variety of image formats. Using the Cyclone Micro 2 remote control, navigate to “Picture” and press ENTER to select it. This will activate the picture filter and take you to the device list. Once in the device list, use the navigation buttons to select the device type the media is located in.
Cyclone Micro 2 Multimedia Player To view the highlighted image in full screen, press ENTER on the remote control. Please note that it may take a moment to display an image depending on its size. Image Playback Options: During image playback, there are a number of options to choose from. Pressing the UP button will play the previous file on the list. Pressing the DOWN button will play the next file on the list. Pressing the ROTATE button on the remote control allows you to rotate image files.
Cyclone Micro 2 Multimedia Player Advanced Image Settings: To get to the advanced image settings press the OSD button on the remote control whilst viewing an image file. This will bring up a window in the centre of the screen. From this screen are a number of available options. View mode: This option allows you to change the play mode . Interval: The time slot setting allows you to select the time duration before the player displays the next image in a slide show.
Cyclone Micro 2 Multimedia Player Persian Blinds V Image is split into vertical lines that get bigger to reveal complete image. Random This setting randomises the transition effects. Slideshow Viewing with Background Music: The Cyclone Micro 2 has the capability to play music in the background whilst displaying a picture slideshow. To play a picture slide show with background music, use the NAVIGATION buttons on the remote control to enter the FILE menu.
Cyclone Micro 2 Multimedia Player The Cyclone Micro 2 will now cycle through all the pictures inside the directory. Notice It is recommended to set all the audio repeat and image transition effects before initiating a slide show with background music. Page 27. Version 0.
Cyclone Micro 2 Multimedia Player File File: By selecting the File Menu, the Cyclone Micro 2 is able to list all the files currently stored in the external storage device. Using the Cyclone Micro 2 remote control, navigate to “File” and press ENTER to select it. This will take you to the device list. Once in the device list, use the navigation buttons to select the appropriate device type. Depending on the size of the device and the number of files it contains, it may take a few moments to detect. E.g.
Cyclone Micro 2 Multimedia Player Settings: This menu provides access to the media player’s system configuration settings. Output: This setting allows you to change the video output of the media player. To select a video output, use the LEFT and RIGHT NAVIGATION buttons on the remote control to select the appropriate setting. Press the ENTER button to confirm. PAL Select this option when connected to a standard analogue TV system. For European countries.
Cyclone Micro 2 Multimedia Player 1080i 60Hz Select this option for an output resolution of 1920 x 1080 with a frame rate of 60 hertz. This option uses interlaced scanning. 1080p 50Hz Select this option for an output resolution of 1920 x 1080 with a frame rate of 50 hertz. This option uses progressive scanning. 1080p 60Hz Select this option for an output resolution of 1920 x 1080 with a frame rate of 60 hertz. This option uses progressive scanning.
Cyclone Micro 2 Multimedia Player Firmware Upgrade: We may periodically release new firmware updates to improve the Cyclone Micro 2’s functionality, add new features or fix any reported bugs that may have been missed during testing. Caution: Please do not turn off the power when upgrading the firmware. The latest firmware updates can be found at http://www.sumvision.com.cn To update the Cyclone Micro 2’s firmware download the firmware update from the Sumvision website.
Cyclone Micro 2 Multimedia Player A confirmation box will appear asking whether to upgrade the system. Select “YES” to initialise the firmware upgrade. The Cyclone Micro 2 will now begin upgrading the firmware. You will notice the player reboot and display the firmware upgrading animation. The screen may go blank for a few moments. Do not turn off the power until the main menu appear again. Important Notice: It is advised to backup all important data before performing a system upgrade. Page 32.
Cyclone Micro 2 Multimedia Player Troubleshooting: No display or sound output to TV: This problem may have several causes. Please check that you have selected the correct AV channel on your TV that is assigned with the input port. For example, if you have connected the device to the TV through the ports labelled AV3, select Channel AV3. If you have determined that the device has been connected correctly, it may be set to the incorrect video output mode.
Cyclone Micro 2 Multimedia Player Please ensure that the device is also connected to your TV via the supplied composite cable during the firmware update. When the screen goes blank, select the composite connection as the active input on your TV. The player no longer responds: If the Cyclone Micro 2 no longer responds to the remote control, the batteries may be dead. Please replace them with new ones. Obstruction of the infrared’s field of vision may also cause unresponsiveness in the player.
Cyclone Micro 2 Multimedia Player Product Specifications: TV System Compatibility: PAL, NTSC, Auto Video Codec Support: H.264, H.263, MKV, MPEG 1/2/4, FLV Video Container Support: MKV, TS, M2TS, TP, WMV, VOB, AVI, MPG, MP4, M4V, MOV, RM, RMVB, FLV and PMP Video Resolution: H.
Cyclone Micro 2 Multimedia Player Media Codec Information: Video Support: Codec Format Resolution MPEG-1 DAT MPG 320 x 240 720 x 576 MPEG-2 VOB MPG TS M2TS TP 720 x 576 1920 x 1080p 1920 x 1080p 1920 x 1080p 1920 x 1080p MPEG-4 AVI MP4 MKV 1920 x 1080p 1920 x 1080p 1920 x 1080p WMV9 / VC-1 WMV 1920 x 1080p H.
Cyclone Micro 2 Multimedia Player Maintenance Notice: To protect the normal use of all accessories, please make sure you understand and pay attention to the following points. � Only use power adapters with power input AC100 ~ 240V, output DC 5V/2A. Using power adapters of any other specification may result in the device being damaged beyond repair. � Under normal working conditions, the power adapter will be warm. Please keep the Cyclone Micro 2 and its power adapter in a well ventilated area.
Cyclone Micro 2 Multimedia Player FCC Class B CAUTION: Changes or modifications not expressly approved by the part responsible for the compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
