Quick Start-1

3 Setup on the RDM

3.1 Instrument Setup Menus

Following is a list of instrument setups menus available from the RDM.

Instrument Menu Access from the RDM

Basic yes

Communication ports yes

User selectable options yes

Analog output, analog expander -

Digital inputs yes

Timer yes

Alarm/Event set points yes

Pulsing output, pulse counter yes

Log memory partitions -

Real time clock yes

Instrument display -

For full setup instructions for these parameters, see the complete PM172

Installation and Operation Manual.

3.2 Performing RDM Communication Adjustment

Î Î Î Î

Press to activate middle window. Press▲▼, and scroll to Addr.

Press

to activate the lower window. Set the instrument address

value and press to save the selected value.

Press

▲▼, and scroll to bAud. Press to activate the lower

window. Set the baud rate value and press to save the selected

value.

3.3 RDM Setup Menu

Î Î Î Î

This menu allows you to view and change RDM properties. Table

1-1 lists available options with their code names and applicable

ranges.

SELECT

diS

ENTE

SELECT

diS

ENTE

SELECT

ENTE

SELECT

ENTE