Instruction Manual

Appendix A Technical Specifications
PTS175 MV Advanced Analyzer 11
Appendix A Technical Specifications
PTS – Pole Top Sensor:
A.1 Electrical Ratings:
PTS MODEL
9650/E1104
9660/E1304
9670/C14C0
Insulation Class
15kV
25kV
35kV
Impulse
110kV
150kV
200kV
AC withstand – 1mn
34kV
40kV
50kV
Voltage Ratio
1400:1
3300:1
10000:1
Current Ratio
600A:10V
600A:10V
600A:10V
Low Frequency dry flashover
80kV
110kV
125kV
Low Frequency wet flashover
60kV
85kV
100kV
A.2 Mechanical:
PTS MODEL
9650/E1104
9660/E1304
9670/C14C0
Insulation Class
15kV
25kV
35kV
Cantilever strength (ultim. lbs)
2800
2800
2800
Weight (lbs)
39
49
59
Shipping weight (lbs)
44
54
64
A.3 Operating Temperature
Temperature range: -40°C to +65°C
A.4 Conductor Diameter range
The two-sided keeper is made of aluminum (for aluminum conductor) or
galvanized ductile iron (for copper conductor) and can accommodate a 0.25 inch
to 1.25 inch diameter conductor
A.5 Basic Construction
The Multicore Sensor is molded from POLYSIL, a high dielectric strength, anti-
tracking polymer concrete developed by Lindsey Manufacturing Company under
EPRI contract
PTS175 MV ANALYZER
A.1 Environmental Conditions
Operating temperature: -30°C to 55°C (-22°F to 131°F)
Storage temperature: -30°C to 85°C (-40°F to 185°F)
Humidity: 0 to 95% non-condensing
A.2 Construction
Dimensions see Figure 2-1
Weight: 8.5 kg (18.74 lbs)
Materials
Case enclosure: Reinforced Polyester
Packaging case: Carton and Stratocell® (Polyethylene Foam) brackets