User Manual

Chapter 7 Communications 57
Table 7-1 Printout Record Parameters
Line Place Heading Parameter  Digits Unit 
1 1 V1/kV1 Voltage L1/L12 5 V/kV
1 2 V2/kV2 Voltage L2/L23 5 V/kV
1 3 V2/kV3 Voltage L3/L31 5 V/kV
1 4 A1 Current L1 5 A
1 5 A2 Current L2 5 A
1 6 A3 Current L3 5 A
1 7 kW/MW Total kW 6 kW/MW
1 8 kvar/Mvar Total kvar 6 kvar/Mvar
1 9 kVA/MVA Total kVA 6 kVA/MVA
1 10 PF Total power factor 6
2 1 THDU1 Voltage THD L1/L12 5 %
2 2 THDU2 Voltage THD L2/L23 5 %
2 3 THDU3 Voltage THD L3 5 %
2 4 THDI1 Current THD L1 5 %
2 5 THDI2 Current THD L2 5 %
2 6 THDI3 Current THD L3 5 %
2 7 Hz Frequency 5 Hz
2 8 A_NEU Neutral current 5 A
2 9 U_UNB Voltage unbalance 5 %
2 10 I_UNB Current unbalance 5 %
3 1 A1_MD Maximum ampere demand L1 5 A
3 2 A2_MD Maximum ampere demand L2 5 A
3 3 A3_MD Maximum ampere demand L3 5 A
3 4 kW_MD/
MW_MD
Maximum sliding window kW import
demand
6 kW/MW
3 5 kVA_MD/
MVA_MD
Maximum sliding window kVA
demand
6 kVA/MVA
3 6 +MWh MWh import 7 MWh
3 7 -MWh
MWh export 
7 MWh
3 8 +Mvarh Mvarh import 7 Mvarh
3 9 -Mvarh
Mvarh export 
7 Mvarh
3 10 MVAh MVAh 7 MVAh
 Readings for all electrical quantities except of energies are sliding average values.
When the value width is over the field resolution, the right most digits are truncated.
 Negative (exported) energy readings are printed without a sign.
 When using direct wiring (PT Ratio = 1), voltages are displayed in 0.1 V units, currents
in 0.01 A units, an powers in 0.001 kW/kvar/kVA units. For wiring via PTs (PT Ratio >
1), voltages are displayed in 1V units, currents in 0.01 A units, and powers in 0.001
MW/Mvar/MVA units. When the value width is over the window resolution, the right
most digits are truncated.