User Manual

Chapter 4 Setup Menus
38
4.12 Access Control Menu
This menu can be only accessed via the Setup Change Menu (CHG). It is used in
order to:
change the user password
enable or disable password check from the front panel keypad
enable or disable password protection for downloading setups and resetting data
through communications
To view an option setting:
Press to activate the middle window.
Use the up/down arrow keys to scroll to the desired option (PASS, CtrL, Port).
Password Setting Password Protection Password Protection
for the keypad for communications
To change the password:
Press to activate the lower window.
Use the up/down arrow keys to modify the password. The password can be up to four
digits long.
Press to store your new password, or to leave the password
unchanged.
To enable/disable password checking:
Press to activate the middle window, and then use the up/down arrow keys
to move to the
CtrL or Port entry.
Press to activate the lower window.
Use the up/down arrow keys to change the password checking status: select OFF to
disable password protection, or select
On to enable password protection.
Press to store your new option, or to leave the option unchanged.
To quit the setup menu:
From the middle window, press or .
Store your password in a safe place. If you do not provide the correct
password, you will need to contact your local distributor for the super-user
password to override password protection.
Acc
S
8780
PAS
S
Acc
S
OF
F
CtrL
Acc
S
OF
F
Port
SELECT
SELECT
ESC
ENTER
ESC
ENTER
SELECT
ESC
ENTER
SELECT
SELECT
CH
G
A
cc
S
ENTER ENTER