User Manual

Chapter 4 Setup Menus
36
To select a display option:
Press to activate the middle window, and then use the up/down arrow keys to
scroll to the desired option.
To change the display option:
Press to activate the lower window.
Use the up/down arrow keys to set the desired option.
Press to store your new setting or press to leave your previous setting
unchanged.
To quit the display setup menu:
From the middle window, press or .
4.11 User Selectable Options Menu
This menu allows you to change options which relate to the instrument features
and functionality. Table 4-7 lists all available options with their code names and
applicable ranges.
To select an option:
Press to activate the middle window, and then use the up/down
arrow keys to scroll to the desired option.
To change the selected option:
Press to activate the lower window.
Use the up/down arrow keys to set the desired value.
Press to store your new setting or to leave the previous
setting unchanged.
To quit the display setup menu:
From the middle window, press or .
Table 4-7 User Selectable Options ( default setting)
Code Parameter Options Description
P.cAL
Power calculation
mode
rEAc
nAct
Using reactive power
Using non-active power
thr.d
Thermal demand
calculation
diS
, En
Disables/enables thermal power demand
measurement
roLL
Energy roll value
10.E4
10.E5
10.E6
10.E7
10.E8
10.E9
10,000 kWh
100,000 kWh
1,000,000 kWh
10,000,000 kWh
100,000,000 kWh
1,000,000,000 kWh
OPt
S
rEAc
P.cAL
SELECT
SELECT
SELECT
SELECT
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
SELECT
CH
G
OPt
S
ENTER
ENTER