Owner's manual

Chapter 3 Display
Operations
Menu Operations
Series PM174 Powermeters 57
The Reset menu allows you to separately reset
minimum/maximum log records, maximum demands and
counters.
To reset the desired registers:
1.
Highlight the middle window by pressing briefly the
SELECT button.
2.
Select the desired entry by scrolling through the list with
the UP and DOWN arrow buttons until the desired entry
appears.
3.
Press the SELECT button briefly to highlight the lower
item.
4.
Press and hold the ENTER button for 5 seconds.
5.
Release the button. The “do” entry is replaced with “done”
showing the operation is complete.
The following table shows available options.
Label Description
Lo.Hi Clears Min/Max log
A.dnd Clears maximum ampere, volt and harmonic demands
P.dnd Clears maximum power demands
dnd Clears all maximum demands
Enr Clears all total energies
tOU.d Clears summary and TOU maximum demands
tOU.E Clears summary and TOU energy registers
Cnt Clears all counters
Cnt1 – Cnt4 Clears counter #1-#4