User guide

Chapter 5 Configuring the PM135 Configuring Communications

74 PM135 Powermeter Series

GSM/GPRS modem in Chapter 2 on how to connect a modem to your

meter.

Using the Front Display

Select GPRS interface from the COM2 Setup menu. This menu entry

appears only if the optional GPRS module is plugged into the

meter. It allows you to set up the meter network address and the default

gateway.

See Viewing and Changing Setup Options in Chapter 3 for information on

configuring parameters via the front display

Device Setup

Reset

Real Time Clock

Display Setup

Basic Setup

Device Options

COM1 Setup

COM2 Setup

Protocol

Interface

Device Address

Modbus RTU

GPRS

Using PAS

To set up GPRS communications:

1. Select Communications Setup

from the Meter Setup menu, and

then click on the GPRS Setup tab.

Figure 5-3: Communication Setup Dialog Box – GPRS Setup Tab