Manual

Chapter 5 Configuring the EM920
General Meter Setup
EM920 Power Quality and Revenue Meter 93
Using Counters
The EM920 provides 8 universal nine-digit counters that you
can use for counting different events.
Each counter can be independently linked to any digital input
and count input pulses with a programmable scale factor. You
can link a number of digital inputs to the same counter. Each
counter can also be incremented through the Control
Setpoints in response to any internal or external event.
To configure the meter counters, select General Setup from
the Meter Setup menu, and then click on the Pulse/Event
Counters tab.
The available options are described in the following table:
Option Range Default Description
Pulse Input None,
DI1-DI10
None Links a digital input to the counter
Multiplier 1-9999 1 The value added to the counter when a
pulse is detected on the pulse source
input
Counter Value 0-999999999 Displays the present counter contents