Manual

Chapter 5 Configuring the EM920
General Meter Setup
EM920 Power Quality and Revenue Meter 81
Local Settings
This setup allows you to specify your local time zone, daylight
savings options and a time synchronization source.
Using the Front Display
Select Local from the main menu. See Viewing and Changing
Setup Options in Chapter 3 for information on navigating in
menus.
See the table below for available options.
Using PAS
Select General Setup from the Meter Setup menu, and then
click on the Local Settings tab.
The available options are listed in the following table.
Display Label Parameter Options Default Description
Country Country Default, or a
country name
Default Indicates the location of the meter.
The default setting stands for the
U.S.A.
Offset Time zone offset,
min
-720 to 720
min
-300 Local offset in minutes from UTC
(Universal Coordinated or
Greenwich Mean Time). Required if
the GPS IRIG-B or SNTP time
synchronization is selected.