Instruction Manual

Chapter 3 Using Front Display

Data Displays

EM720 Power Quality and Revenue Meter 35

Data Displays

The EM720 has 9 multi-page data displays listed in the

following table.

Display Number Display Label Display Contents

1 BILL 0 Present (0) billing period data

2 BILL 1 Last (-1) billing period data

3 BILL 2 Second previous (-2) billing period

data

4 BILL 3 Third previous (-3) billing period data

5 MAX. DEMAND Engineering maximum demands

6 ENGINEERING Instrumentation data

7 SETUP Basic meter setup data

8 DEVICE INFO Device service data

9 DIAGNOSTICS Device diagnostics messages

TEST Mode Data Display

The TEST data display is shown in TEST mode in place of the

billing period data displays. See Device Options and Mode

Control in Chapter 5 on how to enter the meter TEST mode.

TEST mode display: test LED pulse rate in

secondary Wh/imp, test kWh and kvarh energy

registers readings in primary units with an

extended 0.001 kWh resolution.

Extended press SCROLL + SELECT/ENTER is a

shortcut for immediate entering the TEST mode

setup menu.

Billing Period Data Displays

The EM720 provides four billing data displays: one for the

present billing period and others – for three previous billing

periods. All displays have a layout shown in the following

picture. See OBIS Identification Codes

in Appendix H for a list

of OBIS codes indicated in the displays.

Each billing period display lists all total and tariff energy,

maximum demand and cumulative maximum demand

registers for all configured billing registers and all active

tariffs.

The EM720 automatically arranges pages in each display.

Only registers you selected in the billing/TOU register setup

and tariff rates listed in the TOU daily profiles are included

Measurement unit

OBIS (IEC 62056-61) code

Date and time of the last update

Billing period number

Billing register number