Owner's manual

Chapter 4 Setup Menus 29
Table 4-6 Setpoint Setup Options (middle window)
Code Option Description
triG
Trigger parameter The measurement parameter or signal to be monitored
by the setpoint.
On
Operate limit The threshold at which the setpoint becomes operative.
OFF
Release limit The threshold at which the setpoint is released (becomes
inoperative).
On d
Operate delay The time delay (0.1 second resolution) before operation
when the operate condition is fulfilled.
OFF d
Release delay The time delay (0.1 second resolution) before release
when the release condition is fulfilled.
Act
Setpoint action The action performed when the setpoint is operative.
Table 4-7 Setpoint Triggers (lower window, when middle window is triG)
Code Parameter Unit Range
nonE
Setpoint disabled
Status Input
St.On
Status input ON
St.OFF
Status input OFF
Phase Reversal
POS.ro.
Positive phase rotation reversal 
NEG.ro.
Negative phase rotation reversal 
Real-time Values on any Phase
r. Hi. U
High voltage  V 0 to Vmax
r. Lo. U
Low voltage  V 0 to Vmax
r. Hi. C
High current A 0 to Imax
r. Lo. C
Low current A 0 to Imax
r. thd.U
High voltage THD % 0 to 999.9
r. thd.C
High current THD % 0 to 999.9
r. HFc.C
High K-factor % 1.0 to 999.9
r. tdd.C
High current TDD % 0 to 100.0
Real-time Auxiliary Measurements
r. Hi.Fr
High frequency  Hz 0 to 100.00
r. Lo.Fr
Low frequency  Hz 0 to 100.00
Average Values per Phase
A. Hi.C1
High current L1 A 0 to Imax
A. Hi.C2
High current L2 A 0 to Imax
A. Hi.C3
High current L3 A 0 to Imax
A. Lo.C1
Low current L1 A 0 to Imax
A. Lo.C2
Low current L2 A 0 to Imax
A. Lo.C3
Low current L3 A 0 to Imax
Average Values on any Phase
A. Hi. U
High voltage  V 0 to Vmax
A. Lo. U
Low voltage  V 0 to Vmax
A. Hi. C
High current A 0 to Imax
A. Lo. C
Low current A 0 to Imax
Average Total Values
A. Hi.P.i
High total kW import (positive) kW 0 to Pmax
A. Hi.P.E
High total kW export (negative) kW 0 to Pmax
A. Hi.q.i
High total kvar import (positive) kvar 0 to Pmax
A. Hi.q.E
High total kvar export (negative) kvar 0 to Pmax
A. Hi. S
High total kVA kVA 0 to Pmax
A. PF.LG
Low total PF Lag 0 to 1.000