Users Manual

Satcube Ku User Manual v2.3-2020
SATCUBE PROPRIETARY
Satellite position the current
profile has active.
Satcube terminal IP where web GUI
can be reached for when using
automatic acquisition of IP. Usually
WIFI.
Last part shows Current software
version or an indication if a new
software update is available. In
Figure 17 the current software of
the terminal is seen 0.5.12 and by
pressing OK button a new software
update can be downloaded.
d) Terminal Navigation
Proceed from waiting for GPS acquisition screen
o Right arrow button
Show C/N or RQ value on screen
o While in pointing screen press up arrow
Move to Home screen / Information screen
o Click the home button (blue house) or right arrow. Click left arrow to return to
pointing screen
e) Button functionality
Buttons described below can be seen in Figure 18.
White Cog: Long press turns on/off transmission.
Blue House: Brings user to home screen.
C: Long press turns terminal on and off. Short press clears
pointing data.
OK: Long press initiate beam switching procedure. Short
press is used to agree to dialogs.
Up / Down arrow: Short press shows / hides C/N and RQ value in pointing screen. Changes
satellite profile when in home screen.
Right / Left arrow: Short press switches between home screen and pointing screen.
Holding Left arrow on terminal startup initiates terminal factory default settings.
Figure 17 Home screen showing useful information.
Figure 18 Terminal buttons.