Users Manual

Satcube Ku User Manual v2.3-2020
SATCUBE PROPRIETARY
d) Power on
• To use mains power or to charge battery, connect DC adaptor
as guided by Figure 7.
• To use battery power, insert up to three batteries according to
Figure 8.
• A battery in the right-hand slot will be charged when the
terminal is connected to mains power.
• To turn on power, press and hold the red C-button seen in
Figure 9.
• Icons in the bottom left corner of the display show if batteries
are installed and their current power level. When connected to mains
power, the right most battery will show a charging symbol if a battery
is connected in this slot as illustrated in Figure 10.
Figure 5 Wheel located on left-
hand side of terminal. To
LOCK/UNLOCK, turn as shown.
Figure 6 Lock on right-hand side of the terminal. To SECURE in position, pull
the lever as shown. Locked position in the right picture.
Figure 7 Connection ports are located on the front of the terminal.
The DC power cable socket is located to the right. Ethernet and USB
ports are located to the left.
Figure 8 Battery ports are indicated with
orange arrows where the right most port
charges the battery if the terminal is
connected to a power source with the power
cable.
Figure 9 Press and hold the red C-
button to power ON.
Figure 10 Battery
symbols.