MSDS
Page 1 of 3
LAMP MATERIAL INFORMATION SHEET
SELF BALLASTED COMPACT FLUORESCENT LAMPS
_____________________________________________________________________________
MATERIAL SAFETY DATA SHEET (MSDS)
Information and Applicability
The Material Safety Data Sheet (MSDS) requirements of the Occupational Safety and Health
Administration (OSHA) for chemicals are not applicable to manufactured articles such as lamps.
No material contained in a lamp is released during normal use and operation.
The following information is provided as a service to our customers. This Lamp Material
Information Sheet contains the Material Safety Data Sheet information that is applicable.
_____________________________________________________________________________
SECTION 1: PRODUCT IDENTIFICATION
Trade Name: SATCO
This data sheet is inclusive of all “White” CFL (Warm White, Cool White, Daylight) lamps
for general lighting applications
This data sheet is not intended to cover compact fluorescent for special application
including blacklight, germicidal, or colored lamps.
SATCO Products, Inc.
110 Heartland Blvd.
Brentwood, NY 11717
Phone: (800) 437-2826 or (631) 243-2022
_____________________________________________________________________________
SECTION 2: LAMP MATERIALS AND HAZARDOUS INGREDIENTS
Glass & Metal
The glass tube used in a self-ballasted compact fluorescent lamp is Lead Free Glass. The coils in
the lamps (called filaments or cathodes) are made of tungsten. An emitter material covers the
tungsten coil. This emitter material consists of triple oxide (BaO, CaO, SrO) + ZrO2 in a quantity
of 2-25 mg/lamp depending on type. Other than the usual concerns of broken glass, these
materials do not pose a hazard in the event that the lamp breaks.
Phosphor
The phosphor system uses a mixture of rare earth elements such as lanthanum and yttrium as
either an oxide or as a phosphate, along with a barium/aluminum oxide. These phosphors
produce better lamp efficiency and color rendition. The phosphor components may vary slightly
depending on the color of the lamp (cool white, warm white, etc.).Total phosphor weight will vary
by lamp size and type.