MSDS

Page 1 of 3
LAMP MATERIAL INFORMATION SHEET
HIGH PRESSURE SODIUM LAMPS
_____________________________________________________________________________
MATERIAL SAFETY DATA SHEET (MSDS)
Information and Applicability
The Material Safety Data Sheet (MSDS) requirements of the Occupational Safety and Health
Administration (OSHA) for chemicals are not applicable to manufactured articles such as lamps.
No material contained in a lamp is released during normal use and operation.
The following information is provided as a service to our customers. This Lamp Material
Information Sheet contains the Material Safety Data Sheet information that is applicable.
_____________________________________________________________________________
SECTION 1: PRODUCT IDENTIFICATION
Trade Name: SATCO HYGRADE
• This data sheet covers all SATCO HYGRADE brand High Pressure Sodium lamps for
general lighting applications.
SATCO Products, Inc.
110 Heartland Blvd.
Brentwood, NY 11717
Phone: [phone] or [phone]
_____________________________________________________________________________
SECTION 2: LAMP MATERIALS AND HAZARDOUS INGREDIENTS
THERE ARE NO KNOWN HEALTH HAZARDS FROM EXPOSURE TO LAMPS THAT ARE
INTACT. If a lamp is broken, some of the following materials may be released:
Chemical Name
CAS
Numbers
% by Wt.
Exposure Limits in Air (mg/m
3
)
ACGIH(TLV)
OSHA (PEL)
(1)
Barium Compounds (as
EA)
7440-39-3
0.0023
<0.5
<0.05
(1.2)
Lead Solder (as Pb)
7439-92-1
<0.72
<0.15
<0.05
Sodium
7440-23-5
<0.003
-----
---
(1)
Mercury
7439-97-6
<0.013
<0.025
<0.1
(1.2)
Glass (Lead Borosilicate)
---
<66.2
<10 (3)
<15 (3)
(1.2)
Glass (Lead Oxide, %6)
1317-36-8
---
<0.15
<0.05
Aluminum Oxide
1344-28-1
<9.9
<10 (3)
<15 (3)