Installation Sheet

Table Of Contents

PAGE 1
HARICOT NUNCIO wu INSTALLATION INSTRUCTIONS Lamp Installation Step:1 Shown as Figure 1 Turn off the power before installation. Remove the old bal last, capacitor and Ignition existing} Step:2 Shown as Figure 2 A Make sure the Alternating Current Wires § Lamp hider connect to the E26 or E39 socket directly.
PAGE 2
FOR INSTALLATION USING SUPPORT STAND 1.For installation in downward facing horizontal fixture, use support with double’prongs' Cut to desired length after installation. See chart A Opening Fig.A 2 For Installation in downward facing horizontal fixture, use support with single prongs. Cut to desired length after installation. See chart B Hole Illuminated Side Fig.B Sacco Products Inc.