Installation Guide

STARFISH WIFI SMART INDOOR/

OUTDOOR STRING LIGHTS

Model: S11272

INSTALLATION AND SAFETY INSTRUCTIONS

IMPORTANT: Read before installing xture. Retain for future reference.

WARNING: Risk of Fire or Electric Shock

• Installation requires knowledge of luminaries electrical

systems. If not qualied, do not attempt installation.

Contact a qualied electrician.

• To reduce risk of re and over-heating, secure all

connections.

• TURN OFF the electrical power before proceeding.

• The electrical rating of this product is 100-120V/50-60Hz.

• The grounding and banding of the overall system shall be

done in accordance with National Electric Code (NEC)

Article 600 and local codes.

• These string lights can be connected end-to-end, 3 x 24' sets maximum.

• Never use with an extension cord unless the plug can be fully inserted. DO NOT alter the plug.

• To reduce the risk of electric shock, DO NOT use the product if power cord is frayed or broken.

• Always unplug this product before installing or replacing bulbs.

• To avoid risk of re, burns, personal injury and electric shock, it should not be played with or

placed where small children can reach it.

NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference; (2) This device must accept any

interference received, including interference that may cause undesired operation. Visit www.Satco.com

for full warranty details and dimmer compatibility information.

CONTENTS:

• 1 String Light

with LED Bulbs

• 1 Adapter

• 1 Controller

Satco Products, Inc.

PAGE 1
STARFISH WIFI SMART INDOOR/ OUTDOOR STRING LIGHTS Model: S11272 INSTALLATION AND SAFETY INSTRUCTIONS IMPORTANT: Read before installing fixture. Retain for future reference. WARNING: Risk of Fire or Electric Shock • Installation requires knowledge of luminaries electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician. • To reduce risk of fire and over-heating, secure all connections. • TURN OFF the electrical power before proceeding.
PAGE 2
INSTALLATION NOTE: DO NOT DRAPE CORD. KEEP AWAY FROM CHILDREN. STEP 4: Connect the string light with the controller and adapter. Before beginning installation of product, make sure all parts are present. If any part is missing or damaged, do not attempt to install the product. No tools are required for installation. STEP 1: Carefully unpack string lights from box. Straighten string lights, eliminating any kinks before using.