User`s guide

7410F IFL Installation and Users Guide Appendix IV 7100M Chassis
Foxcom Proprietary Information 70
Document No. 93-006-01-A
8. Gently put the Voltage Selector back into the Connector. The Voltage
Selector should snap in easily.
9. Remove the fuse from the fuse drawer, and insert the 1A/250V fuse.
10. Snap in the Fuse Drawer.
If you need to replace the fuse use the parts specified in the following
table:
Table 18 - AC Voltage Fuse Part Numbers
22
Voltage Current Littelfuse Part No. Schurter Part No.
230
0.5 A 239.500 0034.3114
115
1.0 A 239.001 0034.3117
Both fuses are slow-blow 250 VAC rated.
Table 19 - DC Voltage Fuse Part Number
23
Voltage Current Bussman Part No. Schurter Part No.
220 5 A S506 GDC-5 0034.3124
The fuse is slow-burn.
22
or the equivalent
23
or the equivalent