User`s guide

7410F IFL Installation and User’s Guide Appendix IV 7100M Chassis
Foxcom Proprietary Information 59
Document No. 93-006-01-A
9.5 7100M Pinouts
The unit’s pins are found at the backplane of the 7100M chassis. The 7100M backplane incorporates 6 slots. Pinouts from the
nine pin connector at each slot are sent through the backplane assembly to the two 25 pin D connectors, J9 and J10, and one nine
pin connector, J11. Any monitor voltages to be measured may be done between the chassis ground and the required pin.
Figure 40 - 7100M Chassis