User guide

You can block or allow access to specific Web sites. Note that sites on this list

override the content category settings above. To add sites to the list to block or

allow, enter the Web site address, select either Block or Allow as the desired

action, and click ADD TO LIST.

NOTE: To save any changes within the CONTENT SCREENING section, you will be

prompted to enter your password.

To remove a Web site from one of the lists, highlight the site and click DELETE.

To stop blocking all of the sites listed in the Blocked Sites list (in other words,

allow all sites), click the button that reads DISABLE BLOCKED LIST.

To stop permitting access to the Approved Sites list, click the button that reads

DISABLE ALLOWED LIST.

Now that you have identified which categories each screening group can access,

and which sites are approved and blocked regardless of their category listing,

you are ready to assign a screening group to each computer on your network.

Step 3: Assign Computers to Screening Groups

Each computer on your network can be set up for a different level of Internet

access depending on which Screening Group the computer is assigned to.

Return to the Content Screening home page, and at the top of the page, you will

be presented with a list of all devices connected to your Homenet Gateway. To

the right of these devices will be individual drop-down menus that contain the

following options: No Restriction, “Kid’s” Group, and “Teens” Group. Simply

select which group you would like each device to be a part of, and click the SAVE

button at the bottom of this section.