User guide

15
Establishing a wireless connection
Before you get started you will need to locate your serial number and wireless network
key. These are located on the bottom of your Gateway.
To establish a wireless connection with the Gateway you need either a wireless-enabled
note book/laptop or a computer with a wireless network adaptor* installed.
1. Either plug your wireless adaptor into your computer’s USB port or put your
wireless PC card into your laptop.**
2. Configure your wireless adaptor to work with the Gateway. The following
instructions show you how to manually configure your wireless network in
Windows XP.***
* You need to provide the wireless card or adaptor.
** If you experience difficulties installing your wireless card or adaptor contact the manufacturer for support.
*** Please visit the support area of www.2Wire.com for wireless configuration instructions for other operating
systems.