Specifications

Users manual
BULL

50 9 SASE Company, Inc
Assembling
 Unpack your BULL

50 and make sure that everything you ordered is present.
 Assemble the three parts of the pipe and mount
an appropriate nozzle.
 Fasten the rubber fitting of the hose to the pipe and mount the other end of the hose in the coupling on the
dust container on the BULL

50.
 Make sure that the dust container is empty and that the tube filter is mounted correctly in the dust container.
Make sure the filters are not damages. (Also see the chapter “Replacing filters”).
 Use the filter bag with plastic sack if dust hazardous to health is being collected.
 Make sure that the electrical main supply cord and plug are not damaged. Is the cord and/or the plug
damaged it must be replaced by an original cord or plug.
 Connect the appliance to 120 V power supply with a reliable connection to earth. Make sure that the power
supply corresponds with the data on the data plate.
 BULL

50 is now ready to collect dust. The suction and collecting
process is described in details in the following chapter.