Owner`s manual

9
Part No. 000911, 03-m12-2013 Multilift Mobile Owner’s Manual
Adjust Upper Limit Switch
1 Remove the switch positioning bar from its storage bracket and place it
horizontally on the landing floor. See Figure 4 on the next page.
2 Rotate the limit switch handle counter-clockwise to loosen the entire switch
assembly.
3 Slide the switch assembly down the track so the vertical bar of the switch
assembly lines up with the switch positioning bar you placed on the landing
floor.
4 Tighten the handle to secure the limit switch in place
5 Return the switch positioning bar to its storage bracket.