Owner`s manual

12
Multilift Mobile Owner’s Manual Part No. 000911, 03-m12-2013
6 When the lift arrives at the desired landing, the gate will unlock and open
automatically.
7 To prevent unauthorized use of the lift, take the key out when the unit is not
in operation.
Figure 6
Pressing the Emergency Stop button during travel will stop the
lift immediately and activate the alarm (if equipped). The
Emergency Stop overrides the landing station controls. Pull the
Emergency Stop out to return the lift to normal operation.
Storing the Lift
Perform the following steps if you need to store the mobile lift.
1 Ensure the platform is at the floor level and unplug the power cord.
2 Unlock the wheels and roll the lift to the storage location.
3 If required, raise the four lift wheels. For each wheel, place the hand crank
on the wheel bolt and turn the crank to raise the wheels up off the floor.
Key switch: Turn on to activate landing buttons (1 or 2)
Landing buttons (I or II): Press to move platform to
Emergency stop: Press to stop the platform immediately
(overrides the call stations and sounds the alarm)
Alarm button: Press to activate alarm
desired landing 1 or 2
NOTE