Multilift Vertical Platform Lift OWNER’S MANUAL (To Be Retained by Owner After Installation by Authorized Savaria Dealer) Part No.
IMPORTANT Ensure that only an authorized Savaria Dealer installs and services the Savaria™ Multilift Vertical Platform Lift. Under no circumstances is anyone other than a dealer with Savaria training and authorization to install, adjust, service or modify any mechanical or electrical device on this equipment. Failure to follow this warning can result in safety system compromises or defeat; this can result in serious injury or death.
Table of Contents TO ENSURE SAFE OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2. GENERAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3. OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TO ENSURE SAFE OPERATION To ensure safe operation of this equipment, pay careful attention to the important notes below. • Read this manual carefully before using the Multilift Vertical Platform Lift. • To prevent accidents, adhere strictly to the instructions and keep clear of moving parts at all times. • Follow instructions on all equipment labels at all times. Replace any damaged labels immediately. • Ensure that only qualified personnel perform maintenance. Multilift Owner’s Manual Part No.
1. DESCRIPTION Figure 1 shows the exterior components of the Multilift. Figure 1 Part No.
2. GENERAL SPECIFICATIONS Multilift Specifications Applications Residential (indoor/outdoor); commercial (U.S.A.) Load capacity 750 lb (340 kg) Maximum travel 48” (1219 mm); optionally 72” (1829 mm) Levels serviced 2 Travel speed 8 ft/min (0.
3. OPERATION Operating from the COP Controls Figure 2 shows the Multilift car operating panel (COP). Figure 2 To operate the Multilift from the COP controls: 1 Insert the key into the key switch and turn it to the ON position to activate the operating buttons. 2 Apply constant pressure on the UP/DOWN switch (as required) to move the platform to the desired landing. Note that the Multilift will not move if one of the doors /gates is open.
Operating from the Landing Station Controls Figure 3 shows the landing station (hall call) controls. Figure 3 To operate the Multilift from the landing (call/send) station controls: 1 Insert the key into the key switch and turn it to the ON position to activate the operating buttons. 2 Apply constant pressure on the appropriate button to call the platform to the desired landing. Note that the Multilift will not move if one of the doors/gates is open.
4. SAFETY FEATURES Platform Gate The platform gate (shown in Figure 4) prevents the passenger from falling off. This safety feature is optional for residential use and required for public applications. Figure 4 Safety Underpan The safety underpan (shown in Figure 5) is located under the platform. The underpan has sensors that detect any obstacles and stop the downward travel of the lift. Figure 5 Part No.
Door Locks The door lock keeps the door/gate locked when the platform is moving and not at a landing. NOTE Keys are for emergency use only and should always be kept in a safe place for use by trained personnel only. Emergency Door Opening For units with a WR-500 lock, the door can be opened manually using the emergency key provided (Figure 6). Insert the key into the lock and turn it a half turn clockwise to unlock the door.
For units with a GAL lock, the door can be opened manually using a special key inserted into the round pin on the front of the lock (Figure 7). Figure 7 For units with an electric strike on a door provided by Savaria, the door can be opened manually using a 1/4” Allen key inserted through the hole in the front of the door (Figure 8). Figure 8 For units with an electric strike on a door provided by others, contact your Authorized Savaria Dealer for the appropriate instructions. Part No.
Emergency Stop Button Pressing the red Emergency Stop button during travel will stop the lift immediately and activate the alarm (if equipped). The Emergency Stop overrides the landing (call/send) stations. Pull the Emergency Stop out to return the lift to normal operation. Manual Lowering Device In case of an emergency, you can lower the platform manually using the hand crank provided (Figure 9). Take off the cap and insert the hand crank as shown in Figure 8.
5. MAINTENANCE NOTE The owner can perform the 2-month inspections; 6-month inspections must be performed by a Qualified Technician. Contact your Authorized Dealer. Units installed in adverse environments will require additional maintenance on a monthly basis. Maintenance Schedule Verification by owner Frequency Verify general operation of the lift.
Maintenance Record Date Time Reason for Call Multilift Owner’s Manual Comments Dealer Part No.
Operator Troubleshooting The following table lists potential problems and their possible solutions. If the problem persists, contact your Authorized Dealer. Potential Problem Possible Solution Platform travels up but not down Check the underpan sensor. Pull down on the underpan to ensure the pan is not stuck in the activated position. Platform travels down but not up Verify the charge and fluid level of the battery (battery operation only). Check that the key is ON (if applicable).
Multilift Vertical Platform Lift OWNER’S MANUAL Part No. 000609 Copyright 2013 Savaria Corporation Elevators and Lifts www.savaria.
