Specifications

How to Demonstrate
Pre-conditions: Secura is assembled; set to zero and properly leveled.
See also chapter Best "Weighing" Settings to demonstrate.
Display at the beginning.
Put business card under one foot by lifting the balance slightly.
Typical thickness of a business is 0,25 mm or 1/100 inch.
Hint:
Maybe you ask customer what he observes and what he would do the next.
The display is now showing the following:
- Deviation, eg. +0.0015 g. Too high to be accepted! Taring does not help.
It will lead to non retraceable results as Secura is in undefined condition...
- Warning symbol, black triangle.
- Numeric reading does not change to black and remains gray.
- If Printer or Computer is connected: Printer button is deactivated. Printing and data
transfer is not possible - results are secure because inaccurate measurement can not
be recorded (Printer or Computer).
- After 60 seconds an alarm message will appear, with a very clear request to level
the Secura.
There are two ways to start leveling from this point
1. You touch uaaas.
2, You follow the instructions and interactive feedback arrows in the Alarm message.
The next screen is interactive and self-explaining. Level the balance and close action
by touching S. Leveling is done. See also next chapter.
o
Leveling
Please turn each foot in the
direc'ion of the arrow as shown