Specifications

2. Prepare Demonstration
2.1. Assemble
Be aware that for the assembly of the top sliding pane the plastic cover need
to be removed. See second graphic beside.
Hint:
Do not forget to assemble the draft protection ring which is very beneficial for
reliable results.
2.2. Best "Weighing" Settings for Demonstration
- Safety Level -» High
- Ambient conditions -» Unstable
- Application -»Weighing
- Stability signal -» Fast
- SQmin -»switched "On".
Hint:
If "SQmin" does not appear in the weighing menu at first, no SQmin value is
programed in the Service settings. You need assistance from Sartorius Service
to program. Recommended minimum weight value of 100 mg for demonstration
purposes on an analytical balance.
2.3. Change Language
1) Touch menu button at low left corner
2) Touch on the wrench symbol J*.
3) Touch on first menu point in the list - which is for language
(Just in case you do not recognize the language).
4) Select language and confirm with check mark.
5) Go back to main display.
I <iorr a
Fecha y hora
Info del aoarato
Calibiar-'ajuslar