Specifications

Repairs and Maintenance PR 5220 Operating Manual
92 Sartorius
10 Repairs and Maintenance
Repairs are subject to inspection and must be carried out at Sartorius. In case of defect or malfunction,
please contact your local Sartorius dealer or service center for repair. When returning the instrument for
repair, please include a precise and complete description of the problem. Maintenance work may be carried
out only by a trained technician with expert knowledge of the hazards involved and the required
precautions.
10.1 Solder Work
Soldering work on the instrument is neither required nor permitted.
10.2 Cleaning
!Disconnect the instrument from the supply voltage and remove connected data cables.
!Prevent moisture from penetrating the instrument
!Do not use aggressive cleaning agents (solvents, etc.).
!
Do not wash down the equipment with water or dry it with compressed air; this is not permitted.
11 Disposal
If you no longer need the packaging after successful installation of the equipment, you should discard it by
the local facilities for waste disposal. The packaging is made of environmentally friendly materials and is a
valuable source of secondary raw material.
Place discharged batteries in local collection boxes (not in the household waste).
In Germany, corresponding collection boxes are made available by GRS (Stiftung
Gemeinsames Rücknahmesystem Batterien) on request with Sartorius.
For scrapping of the instrument, please contact your local authorities. Prior to
scrapping, any batteries should be removed. In Germany, Sartorius AG takes care
of the return and legally compliant disposal of its equipment on its own.
In other countries, please consult with the local authorities.