Specifications

SMA Protocol PR 5220 Operating Manual

72 Sartorius

6.3.2.2 Request for Taring with Fixtare Value

Command: <LF>T<xxxxxx.xxx><CR>

Reply: The scale makes a taring attempt using the fixtare value <xxxxxx.xxx> and signals the tared

status in the <s> and <n> characters.

For details, see Chapter 6.4.1 .

6.3.2.3 Request for Zero Setting of the Scale

Command: <LF>Z<CR>

Reply: The scale makes a zero setting attempt and signals the zero status in the <s> character.

For this function, the stability condition must be met. The maximum waiting time for stability

is set under [Tare timeout]; see Chapter 5.4.13.

For details, see Chapter 6.4.1 .

Unless the scale is in the zero setting range, an error reply is generated.

6.3.2.4 Request for Tare Resetting

Command: <LF>C<CR>

Reply: The scale deletes the tare weight and signals the tare reset status in the <n> status character.

The scale tare is reset.

For details, see Chapter 6.4.1 .

6.3.3 Scale Diagnosis

Command: <LF>D<CR>

Reply: The scale starts the diagnosis and returns a diagnosis reply.

For details, see Chapter 6.4.1 .