Specifications

Contents PR 5220 Operating Manual
4 Sartorius
5.4.1 Displaying Calibration Data 33
5.4.2 Selecting the Calibration Mode 34
5.4.3 Determining the Maximum Capacity (Max) 35
5.4.4 Determining the Scale Interval 36
5.4.5 Determining the Dead Load 37
5.4.6 Calibration with Weight (by Load) 38
5.4.7 Calibration with mV/V Value 39
5.4.8 Calibration with Load Cell Data (“Smart Calibration“) 40
5.4.9 Subsequent Dead Load Correction 41
5.4.10 Linearization 41
5.4.11 Test Value Determination/Display 42
5.4.12 Finishing/Saving the Calibration 42
5.4.13 Parameter Input 43
5.5 Error Messages............................................................................................................................................................... 46
5.5.1 Measuring Circuit Error Messages 46
5.6 Configuring General Parameters.................................................................................................................................. 47
5.6.1 Serial Ports 47
5.6.2 SMA Protocol 48
5.6.3 Operating Parameters 49
5.6.4 Fieldbus Parameters 50
5.6.5 Network Parameters 51
5.7 Limit Values, Digital Inputs and Outputs ................................................................................................................... 52
5.7.1 Conditions for Limit Values and Digital Inputs, States for Outputs 52
5.7.2 Configuring Digital Inputs and Outputs 53
5.7.3 Configuring Outputs 53
5.7.4 Configuring Inputs 54
5.7.5 Configuring Limit Values 56
5.8 Analog Output...............................................................................................................................................................58
5.8.1 Adapting the Analog Output 59
5.9 ConfigureIt Professional............................................................................................................................................... 60
5.9.1 Installation 60
5.9.2 Starting the Program 62
5.9.3 Establishing the Communication to the Instrument 64
5.9.4 Transferring a Data Set from the Instrument to the PC 65
5.9.5 Saving the Current Data Set on the PC 65
5.9.6 Transferring the Current Data Set or Selected Parameters to the Instrument 67
5.9.7 Resetting the Instrument to Default 67
5.9.8 Exporting a Data Set as a Printable File 67
5.9.9 Operating the Instrument Using the Browser (VNC Program) 68
5.9.10 Closing the Program 68
6 SMA Protocol .................................................................................................................................................................69
6.1 General ...........................................................................................................................................................................69
6.2 Description of Used Symbols .......................................................................................................................................69
6.3 SMA Command Set ....................................................................................................................................................... 70
6.3.1 Requesting a Weight 70
6.3.2 Controlling the Scale 71
6.3.3 Scale Diagnosis 72
6.3.4 Scale Data 73
6.3.5 Scale Information 73
6.3.6 Escape Command 73
6.4 SMA Reply Messages..................................................................................................................................................... 73
6.4.1 Standard Reply 74
6.4.2 Reply with Unknown Command 75
6.4.3 Reply in Case of Communication Error 75
6.4.4 Reply with Diagnosis Command 75
6.4.5 Reply with ‘A’ and ‘B’ Command 76
6.4.6 Scale Reply with ‘I’ and ‘N’ Commands 77
6.5 Communication Error ...................................................................................................................................................77