Specifications

PR 5220 Operating Manual Commissioning
Sartorius 27
5.2 Switching on the Instrument
The instrument can be put into operation and calibrated using a PC with the VNC program (on the CD
packed with the instrument), an Internet Browser or the ConfigureIt program.
5.2.1 Resetting the Instrument, Activating 'DHCP'
The instrument can be reset using a pin with a diameter of 1.0 mm (e.g.
paper clip).
By actuating during approx. 1 second, the program is re-started.
When actuating during approx. 3 seonds, 'DHCP' is activated in the
instrument (independent of the previous settings). This ensures that a valid
address for identification of the instrument in the network can be assigned to
the instrument by a server.