Specifications

Installing the Instrument PR 5220 Operating Manual
16 Sartorius
3.1.1 Network Port
The network port is built in as standard equipment. The LEDs on the connector indicate whether the port is
functioning.
Remote operation of the instrument from the PC is
possible; install VNC program version 3.3.7 on the PC. For
setting the network address, see Chapter 5.2.2.
Transfer rate:
10 Mbit/sec, 100Mbit/sec,
full/half duplex, auto-detection
Connection method:
Point to point
Cable:
CAT 5 patch cable, shielded twisted pair
Cable impedance:
150 ohms
Connection:
RJ45 socket on top of housing