Specifications
22
S
afe
Weighing
Systematic Personnel
Safety and
finely powdered particulates from
escaping into the breathing zone
of the user. At the same time, due
to the constant inlet air velocity of
the air current and the low-
turbulence flow within the hood,
consistent and reproducible
weighing results are guaranteed.
The balance and safety powder
hood are a coordinated system
that meets both requirements –
maximum user protection and
secure weighing results.
Safety in weighing toxic, powdery
substances and accuracy when
weighing-in are requirements that
have become inseparably linked to
modern laboratory environments.
A Sartorius safety weighing
station, consisting of the Safety
Powder Hood (SPH) and a Cubis®
lab balance, is the professional
solution to both of these
requirements.
The safety powder hood creates a
contained area around the lab
balance which prevents any air or
With the sample holder
YFH01MS, the best ergonomics
are ensured for weighing-in
under the difficult conditions in
the hood.
With the grid weighing pan
WP03MS, even lab balances
without draft shields
(readability of 10 mg or 100 mg)
can be operated in the air flow
of the hood without any
problems.
With the optional infrared
sensor YHS01MS, the draft
shield can be opened touch-free
and the balance can be tared.
This reduces the risk of
contamination.
With the
Bluetooth
®
interface
module, the printer YDP10BT
can be operated wirelessly
outside the hood, which limits
the use of possibly
contaminated cables.
With the Q-Stat ionizer
integrated into the draft shield
DI, not only electrostatic
influences on the weighing
results are reduced. The
“stubborn” behavior of the
sample when handling with
a spatula is also reduced and
contamination due to spilt
samples is prevented.
Th
e
A
pp
li
cat
i
on-or
i
ente
d
P
er
f
ormance Features o
f
C
ubi
s
®
L
a
b
B
a
l
ances
M
a
k
e t
h
e
E
nt
i
re
S
ystem even More
S
a
f
e
:
The mechanical level indicator
of a balance is often difficult or
even impossible to see inside a
hood. This leads to parallax
errors in leveling and ultimately
to incorrect measurement
results. With Q-Level (optional,
only for models with weighing
capacity ≤ 6.2 kg and
readability > 0.001 mg), leveling
can be performed automatically
in the hood with motorization.
WL-1010-e13017_98649-008-61-US.indd 22 5/29/2013 3:28:57 PM