Operating instructions
7
Verifiable Models, IS Series IS16EDE-HXCE IS34EDE-HXCE IS64EDE-SXCE IS150IGG-HXCE IS300IGG-HXCE
Readability in g 0,1 0,1 1 1 20
Weighing capacity in kg 16 34 64** 150** 300**
Max. overload capacity in kg 130 130 130 600 600
Tare range (subtractive) in kg – 16 – 34 – 64 – 150 -300
Preload (can be electronically compensated in kg 4 4 13 20 20
without reducing the weighing capacity)
Max. preload at start of ca. 19 ca. 21 ca. 45 – -
isoTEST calibration/adjustment
(weighing inst. must be zeroed) in kg
Repeatability <±g 0,05 0,1 0,3 1 5
Linearity <±g 0,2 0,2 1 4 8
Sensitivity drift within
+10 to +30 °C <±/K 2 • 10
-6
2 • 10
-6
3 • 10
-6
2,5 • 10
-6
2,5 • 10
-6
Response time (average) s 1,5 1,5 1,5 1,5 1,5
External calibration weight g 10000 (F1) 10000 (F1) 10000 (F2) 50000 (F2) 100000(F2)
(of at least accuracy class...)
Accuracy class K K K K K
Type BF BF HC BF BF
Verification scale interval g 1 1 10 10 20
Minimum capacity acc. to g 5 5 50 50 100
prepackage regulations*
Mindestlast nach FPV g 150 150 - - -
Operating temperature range °C 10...30 10...30 10...30 10...30 10...30
(50 to 86°F) (50 to 86°F) (50 to 86°F) (50 to 86°F) (50 to 86°F)
Load plate dimensions mm 300 x 400 300 x 400 300 x 400 800x600 800x600
Net weight, approx kg 16 16 70 70 70
Dust and water protection rating of the
housing acc. to EN 60529 IP65 IP65 IP65 IP67 IP67
AC power source
Power supply model YPS02-X or AC adapter model YPS02-Z (100-240V); YRB02-Z (rechargeable battery), YPS02-XV24 (24V)
Frequency Hz 48 – 62
Adaptation to ambient conditions By selection of 1 of 4 optimized filter levels
Display update (depends on filter level selected) 0.1 - 0.1 - 0.2 - 0.4 (normal output rate)
Power consumption Average: 25VA
Built-in RS-485 interface (Standard equipment; xBPI protocol): 8 bits, odd parity,
transmission rate: 9600 - 38,400 baud; half-duplex; convertible to
RS-232 (SBI protocol): 7 bits, parity: even, odd, mark,
space; transmission rates: 150 — 19,200 baud; 1 or 2
stop bits, software/hardware handshake; factory settings:
1200 baud, odd parity, 1 stop bit, hardware handshake with 2 characters after CTS
* = factory setting
** = variable weight unit kg, t