User manual

6 Cubis MSU Brief Instructions
Information for the User
The System Settings area under (Menu) contains all basic settings and parameters
that affect the entire operation of the balance.
The Wizard
In some menus, you can switch between two types of display:
In the Overview, all parameters with configured options are listed; you can select
each individual option to change its setting.
If you activate the Wizard in the same menu, the program guides you forward in
steps: The individual parameters and their options are then displayed in sequence.
Use of the Display and Control Unit
Operating Keys:
D TASK key: Opens the Task Management menu for selecting applications and
configuring tasks. You can also press the TASK key from this menu at any time
to switch to the operating mode.
H USER key: Opens the User Management menu, where user settings can be
configured. You can also press the USER key from this menu at any time to
switch to the operating mode.
J TARE keys (left and right): Tares the balance.
P PRINT key: Prints the measurement results currently displayed or an application-
specific printout.
A On/off key: Switches on/off and into standby.
- Softkeys: Activate the function indicated directly above them.
qwe Cursor softkeys for navigation on the display.
O Keys for operating the electronic draft shield (optional)