User manual

Information for the User
Cubis MSU Brief Instructions 33
Step 10: Enter User Name and User Description
t To enter a name for the user profile, select the button User Profile Name.
During operation of the balance, the user name is shown in the upper-right part of
the display as long as the respective user profile is active.
t Enter the name (maximum of 40 characters) and select OK.
t To enter a description for the user profile, select the button User
Description
.
t Enter the description and select OK.
t To complete the process, select Save.
y The program switches to the user selection list. The newly created user profile
is added to the end of the list.
t If you wish to activate the new user, select the button with the user's name and
confirm with the softkey w.
y The program switches to the operating mode, and the selected user is activated.
or
t To create additional user profiles, select Edit and repeat the procedure as
described above.
or
t If you would like to switch to the operating mode without changing the user,
select Start.
Activating a User
In the operating mode, the active user is displayed in the user info area in the
upper right-hand corner of the display. To activate a different user, open the
User Management menu and select the desired user.
H t Press the key USER H.
y The available users are listed. The currently active user is indicated by an arrow
and a darker background.
t Select the user you would like to activate.
y The program switches to operating mode; the selected user is activated and
shown in the user info area on the upper right.