User manual

32 Cubis MSU Brief Instructions
Information for the User
Step 6: Assign User Rights
t Select the corresponding options to define which functions the user can access.
The following rights can be assigned individually:
– Creating, copying, modifying and deleting tasks
– Importing data
– Modifying the calibration and adjustment parameters
– Modifying basic parameters
Administrators can access all functions.
t To move to the next menu item, select Next.
y An overview of all selected user settings is displayed.
Step 7: Define Whether Password Protection is Active
If you assign a password, this profile cannot be used until the password has been
entered.
t Select the corresponding option to define whether the user profile is password-
protected or not.
The password is defined in Step 10.
Only the Administrator can open the user profile without the password (for
example, if the user forgets the password) and assign a different password.
The Administrator can remove the password protection so that a new password
can be set, if desired.
Step 8: Check Your Settings
t Use the scroll bar or the down arrow to view all settings.
t To modify a setting, press the corresponding button. This opens a screen
showing the options for that setting.
t If the settings are correct, select Next.
Step 9: Define the Password (If Password Protection Enabled)
y If you selected the option for password protection in Step 7 (see above), you
are now prompted to enter the desired password twice.
t Select the upper button.
t Enter the desired password (minimum 4 characters, maximum 8; only numbers
and uppercase letters are permitted).
t Press the lower button, and enter the password again.
t Select Next.